Control of Tools and Equipment in the IPC620 Standard

-
During the production process, tool and equipment control is something every manufacturer must master. How to control tools and equipment? Each manufacturer must:
Control of Tools and Equipment in the IPC620 Standard
1. Select tools for crimping, thread cutting, peeling, binding, measuring, testing, and achieving the expected function in the prepared workplace.
2. Clean and proper maintenance tools and equipment.
3. Check the performance of the tool, using in cabling, to prevent tangible loss.
4. Prevent unidentified, defective, and unverified tools from entering the workplace.
5. There should be documents detailing the operating procedures and maintenance intervals for tool and equipment verification or setting.
6. Records shall be made on the effectiveness or functional tests of tools and equipment.
According to domestic or foreign standards. The manufacturer must establish a verification system. This standard must include:
1. The measurement standard is suitable for tools that need to be glamorous and must be traceable to official standards. The verification tool must be carried out in an environment suitable for the tool.
2. The calibration interval must be based on the tool type and calibration record. The increase or decrease of the interval time must be determined based on the stability of the previous verification record.
3. Save the verification record.
4. The label on the tool must contain the following: the date of verification, the effective date of verification, and limitations of use. If the tool cannot be labeled, it must be attached to the toolbox or specified as a document in the procedure. Tool identification.

Yeahui is a connector supplier with 11 years of experience in developing high-quality connectors and wiring harnesses. We have many types of products, including obd connector, circular connector, agricultural connector and so on. We can meet the requirements of various customers. Feel free to learn more about connectors or buy our connectors, looking forward to your message.
More about NEWS(What is the IPC620 Standard).

评论

发表评论

此博客中的热门博文

What is the Difference Between J1939 Connector Type 1 and 2?

-
图片
  SAE J1939 (hereinafter referred to as J1939) is the recommended standard of the American Society of Automotive Engineers (SAE). It is controlled and communicated by the "Truck and Bus Electrical & Electronics Committee" (Track & Bus Electrical & Electronics Committee). Developed and written by the Track & Bus Control and Communications Network Subcommittee. J1939 has become a recognized industry standard and choice for commercial vehicle diagnostics and data communication heavy, off-highway, truck, bus, ship propulsion, power generation, industrial pumping, construction, and material handling machinery. J1939 is a high-level protocol network (CAN) based on Controller Area. It is widely used by the diesel engine industry to provide diagnostic data such as vehicle engine speed, temperature, oil temperature, exhaust emissions, and other customizable options. J1939 connectors are divided into black and green rubber cores, but do you know the difference between t...
阅读全文

Benefits of overmolded connectors and wiring harnesses?

-
图片
What is overmolding? In short, overmolding is an injection molding process in which two or more materials are used to combine a harness wire and a connector to form a single part, and the cable assembly is placed in a mold. In this process, the first material substrate will be covered by other materials. The overmolding process requires the use of insert molding (single injection) or multiple injection molding techniques to cover rigid plastic parts with TPU layers or other overmolding materials. So what are the benefits of the connector and harness overmolding process? Benefits of overmolding connectors and harnesses: 1. Increase the flexibility of the cable harness exit so that most of the movement between the cable harness and the connector occurs at the cable harness exit. 2. Provide abrasion resistance, impact resistance or impact resistance. 3. Fix the cable assembly by sealing the assembly in plastic. 4. Provide 360 degree strain relief and increase tension. 5. Cr...
阅读全文

​Cars are equipped with diagnostics tool or obd-ii ports

-
图片
Modern cars have the capacity of a few computers, are tooled with software that contains millions of lines of programming code and produce gigabytes of data, but they are still different from connected cars. ​ A smart vehicle is able to optimize its performance to reduce fuel consumption, show the best path to follow taking into account current traffic and weather conditions, detect errors in the engine and collect information data to negotiate lower insurance rates. Most cars and light trucks are equipped with on-board diagnostics or an OBD II port that provides access to data from the engine control unit (ECU). To get the information you need to plug in an external device. The OBD-II specifications provide a standardized hardware interface - a female 16-pin (2x8) J1962 connector, so a single external device can be used for most car models. It also should have an Internet connection to transfer the collected data. OBD-II connects to the Internet, and generally needs to use th...
阅读全文