obd connector

M12 connectors are circular connectors with a 12-mm locking thread used for sensors, actuators, Fieldbus and industrial Ethernet, primarily in factory automation applications. Often with ratings ofIP65, IP68 and IP69K, they are ideal for washdown and corrosive environments. ​ They are available with 3, 4, 5, 8 and 12 pins. While higher pin counts are not planned, other locking styles such as bayonet and push-pull are continuously under development. The M12 family can be found in many applications such as factory automation, measurement and control, communications, food and beverage, transportation, agriculture, robotics and alternative energy. When it comes to specific applications, users must select the right pin count. For sensors and power applications, 3 and 4 pins are required. Profinet and Ethernet use 4 and 8 pin counts. And Fieldbus, CANbus and DeviceNet primarily use 4 and 5 pin counts. Finally, specify 12 pins for signal requirements. Yeahui is a connector cabl...

The compact connectors include wire-to-board and wire-to-wire configurations and has been designed with fully-polarised scoop-proof housings to protect terminals from damage, and a low insertion force. ​ ​ The 3.0mm-pitch devices have power contacts that can handle currents of up to 5A per contact and are available in dual-row configurations with two to 24 circuits and single-row configurations with two to 12 circuits. The 4.2mm-pitch connectors has a current rating up to 9A per contact and are available in two to 24 circuits in dual-row and three to five circuits in single-row configurations. The 5.7mm-pitch connectors use a special alloy material for high-current-rating wire-to-board applications, handling up to 23A per contact. This option is available in a dual-row configuration with two to 24 circuits. Crimp, snap-in header and receptacle contacts can terminate wires from 30 to 20 AWG for the 3.0mm-pitch connectors, 38 to 16 AWG for the 4.2mm connectors and 16 to 12AWG ...

The Power Generation, Transmission and Distribution sector faces various challenges. Due to the large sums of data and signal transmissions required for monitoring all the equipment in the generation and distribution process, reliable connection is critical. Hardwiring does not always present itself as an efficient solution to such a challenge; industrial connectors by contrast not only can overcome the obstacles, but also propose an array of additional benefits. ​ Hardwiring is time-consuming, requiring high efforts and costs. Power networks are calling for short reaction times; the sub-systems need to run as safe and smoothly. In order to meet such requirements, it is useful to utilize industrial connectors. They not only reduce wiring costs, but also allow faster construction, commissioning and maintenance processes in the field. Traditionally, hardwiring has been seen a viable option for servicing the Power Generation, Transmission and Distribution sector. More recently, h...

Wikipedia defines an autonomous car (also known as a driverless car, self-driving car, robotic car) as a “vehicle that is capable of sensing its environment and navigating without human input. Autonomous cars use a variety of techniques to detect their surroundings, such as radar, ladar (laser lights), GPS, the odometer and computerised vision. Truly autonomous cars do not require human intervention other than setting the destination and starting the system. The automatic system can drive and make its own decisions. ​ The automotive industry has become a very crowded place as automakers lost their position as the key players in the market. IT giants are moving in on this industry, promoting automation and domination of AI on the roads. The future highways and city streets are being looked at through the eyes of their intended future inhabitants: driverless cars and trucks. In May 2014, Google presented its new prototype of driverless cars without a steering wheel, gas pedal, or ...

Cables are required for both life and work. Commonly there are car cables, electronic cables, terminal cables and connecting harnesses in various types of equipment. Problems with these cables can easily lead to the inability of the machine and equipment to function properly. In this case, the manufacturer considers this when designing the cable, so multiple tests are performed during the production process. So  what is the cause of the damage to the cable ? ​ 1. The reason for the natural damage of the  cable during use can be caused by the long time of use of the product. Each product has a certain life span, and nothing can be used for a lifetime without damage. 2. The mechanical properties of the cable are reduced, which is very likely to cause an open circuit and a short circuit between the wires. This will directly cause the cable to burn out, and the terminal of the product will be oxidized and deformed, which will result in The bad contact occurred, causing the ...

The cable is one of the types of electronic wire harnesses, and is widely used in various electronic devices, such as electric vehicles, household appliances, communication equipment, automation equipment, and the like, and different functions of the electronic harness connecting wires have different production standards, specific Including the specifications of the wire, the thickness of the terminal cable, the material of the wire harness, and so on. ​ Some informal manufacturers use recycled PVC for the insulation layer, recycled copper, copper clad aluminum, steel wire or several hybrids for the core conductor. These kinds of conductor resistance are very harmful to electronic equipment, so be careful when choosing. The regular cable insulation layer must be made of new anti-oxidation PVC plastic. The core conductor is made of oxygen-free copper, tin-plated copper or silver-plated copper made by air isolation. It must be processed by multiple processes and precise equipment....

Safety performance is the core quality of common cable products. Because it is a connecting cable, it mainly transmits electrical energy and electrical signals. Generally, electrical appliances are good. Normal pressure operation is easy to grasp, and some high-voltage equipment and data transmission cables are used. The performance of the cable is required to be particularly high-end. ​ The connector is the main component of the device, because it is not the main body of the device, but if there is a problem, it will affect the operation of the entire device. There is a lot of pressure on manufacturers of production cables because today's connectors require considerable safety and stability, and the precision is increasing. Now  most of people are inseparable from the connection line. The data lines on the mobile phone are mostly used by most people. In many cases, if there is a problem with the data line, we only need to change one data line. We replaced the entire chargin...