REACH certification

-
The REACH certification system requires that all existing chemicals and new chemicals with an annual output of more than 1 ton and chemical substances used in various products need to register their basic information. For chemicals with an annual manufacturing volume or import volume greater than or equal to 10 tons And chemical substances should also undergo chemical safety assessments and complete safety reports. The REACH decree covers not only chemical manufacturers but also importers, downstream industries, and many other fields, including light industry, electromechanical, and textile industries where chemicals are widely used.
REACH certification
As we all know, the EU "Regulations on Registration, Evaluation, Authorization, and Restriction of Chemicals" ("REACH") has been officially implemented. According to the regulations, the European Commission will establish a unified chemical monitoring and management system and complete the management of all related chemicals by 2012. Compared with the directives implemented by the European Union in recent years, the REACH regulation has a wider scope of influence. It will include about 30,000 chemical products on the EU market and their downstream textile, light industry, pharmaceutical, and other products into registration, evaluation, and licensing. Three management monitoring systems. Products that are not included in the management system cannot be sold on the EU market. REACH is the EU's law for the preventive management of all chemicals entering its market. It will be officially implemented on June 1, 2007.
Fifteen substances need to be checked: Anthracene Anthracene C14H10, 44'-Diaminodiphenylmethane 44'-Diaminodiphenylmethane C13H14N2, Dibutyl-phthalate Dibutyl phthalate C16H22O4, Triethyl arsenate Triethyl arsenate (C2H5) 3AsO4 , Cobalt dichloride CoCl2, Diarsenic pentaoxide arsenic pentoxide; arsenic anhydride; arsenic anhydride As2O5, Diarsenic trioxide arsenic trioxide; arsenic anhydride; arsenic; white arsenic; arsenic anhydride As2O3, sodium dichromate dehydrate sodium dichromate dehydrate Substance; sodium alum Na2Cr2O7? 2H2O, 5-tert-butyl-246-trinitro-m-xylene (musk xylene) 2,4,6-trinitro-5-tert-butyl m-xylene (xylene musk) C12H15N3O6, Bis (2-ethyl(hexyl)phthalate)(DEHP) Di(2-ethylhexyl phthalate) C24H38O4, Hexabromocyclododecane(HBCDD) Hexabromocyclododecane(HBCDD) Hexabromocyclododecane C12H18Br6, AlkanesC10-13chloro(Short Chain Chlorinated Paraffins) short chain Chlorinated paraffin (C10-13), Bis(tributyltin)oxide oxidized bistributyltin C24H54OSn2, Lead hydrogen arsenate PbHAsO4 and Benzyl butyl phthalate C19H20O4 (BBP).
The main content of REACH is to prove that daily-use products do not contain harmful chemical substances. Therefore, all daily-use products produced in the EU or imported into the EU market, which mainly refer to textiles, must pass the registration, inspection, and approval of the content of hazardous chemicals, and once they exceed the prescribed content, they cannot be sold on the EU market.
The purpose of REACH certification is to protect human health and the environment; maintain and improve the competitiveness of the EU chemical industry; increase the transparency of chemical information;

Yeahui is a connector supplier with 11 years of experience in developing high-quality connectors and wiring harnesses. We have many types of products, including obd connector, circular connector, agricultural connector and so on. We can meet the requirements of various customers. Feel free to learn more about connectors or buy our connectors, looking forward to your message.
More about NEWS(RoHS Science).

评论

发表评论

此博客中的热门博文

What is the Difference Between J1939 Connector Type 1 and 2?

-
图片
  SAE J1939 (hereinafter referred to as J1939) is the recommended standard of the American Society of Automotive Engineers (SAE). It is controlled and communicated by the "Truck and Bus Electrical & Electronics Committee" (Track & Bus Electrical & Electronics Committee). Developed and written by the Track & Bus Control and Communications Network Subcommittee. J1939 has become a recognized industry standard and choice for commercial vehicle diagnostics and data communication heavy, off-highway, truck, bus, ship propulsion, power generation, industrial pumping, construction, and material handling machinery. J1939 is a high-level protocol network (CAN) based on Controller Area. It is widely used by the diesel engine industry to provide diagnostic data such as vehicle engine speed, temperature, oil temperature, exhaust emissions, and other customizable options. J1939 connectors are divided into black and green rubber cores, but do you know the difference between t...
阅读全文

Benefits of overmolded connectors and wiring harnesses?

-
图片
What is overmolding? In short, overmolding is an injection molding process in which two or more materials are used to combine a harness wire and a connector to form a single part, and the cable assembly is placed in a mold. In this process, the first material substrate will be covered by other materials. The overmolding process requires the use of insert molding (single injection) or multiple injection molding techniques to cover rigid plastic parts with TPU layers or other overmolding materials. So what are the benefits of the connector and harness overmolding process? Benefits of overmolding connectors and harnesses: 1. Increase the flexibility of the cable harness exit so that most of the movement between the cable harness and the connector occurs at the cable harness exit. 2. Provide abrasion resistance, impact resistance or impact resistance. 3. Fix the cable assembly by sealing the assembly in plastic. 4. Provide 360 degree strain relief and increase tension. 5. Cr...
阅读全文

​Cars are equipped with diagnostics tool or obd-ii ports

-
图片
Modern cars have the capacity of a few computers, are tooled with software that contains millions of lines of programming code and produce gigabytes of data, but they are still different from connected cars. ​ A smart vehicle is able to optimize its performance to reduce fuel consumption, show the best path to follow taking into account current traffic and weather conditions, detect errors in the engine and collect information data to negotiate lower insurance rates. Most cars and light trucks are equipped with on-board diagnostics or an OBD II port that provides access to data from the engine control unit (ECU). To get the information you need to plug in an external device. The OBD-II specifications provide a standardized hardware interface - a female 16-pin (2x8) J1962 connector, so a single external device can be used for most car models. It also should have an Internet connection to transfer the collected data. OBD-II connects to the Internet, and generally needs to use th...
阅读全文