Analysis of the development trend of the connector industry

-
Large-scale use of high-performance connectors is the development trend of the future manufacturing industry
As a bridge for communication within the circuit system, the connector has the characteristics of easy maintenance and easy upgrade, meanwhile, it can simplify the assembly process of electronic products, improve the flexibility of design and production, thereby increasing the degree of automation of the entire system and reducing costs. Therefore, the performance of the connector will affect the operating efficiency and reliability of the entire system. In the future, the diversity, performance and quality of connector products will become important factors in the entire manufacturing upgrade and development process.
Analysis of the development trend of the connector industry
More emerging areas have strong demand for connectors
With the rapid development of 5G, Internet of Things, AI, and intelligent driving, the market has put forward new requirements for connector technology. In communication equipment, connectors carry the task of data connection between terminals. The development of 5G will promote the growth of demand for wireless connectors. In automotive applications, with the continuous advancement of automotive intelligence, in addition to the original engine management system and other devices that require connector data connections, more advanced vehicle entertainment systems, intelligent driving systems, and other connectors have increasingly demanded connectors. Industrially, connectors require stronger reliability and performance. With the construction of the Industrial Internet, more reliable connectors are needed between industrial equipment and networks. Therefore, the development trend of connectors can be summarized in the following table.
From single signal transmission to multiple signal transmission
Traditional connectors only transmit a single signal, such as video, control, or data signals. As electronic products become thinner and thinner, connectors change from a single signal transmission to multiple signal transmissions. The same cable can transmit optical, electrical, or other signals at the same time. It also helps save space and improve system reliability.
Smaller, more convenient, more accurate, lower cost, smarter connector technology
The previous connectors were used for many contacts, and they were filled in many expansion card slots, but in the 5G era, there may be dozens of connectors in a fiber optic device, which requires smaller connectors to achieve higher performance connections.
With the advent of the AI era, connectors will not only achieve simple transmission functions. In the future, in addition to ensuring the data of electrical signals in the switching power supply, the connector may perform simple intelligent judgment and protection, output correct data and avoid power Damage.

Yeahui is a connector supplier with 11 years of experience in developing high quality connectors and wiring harnesses. wo have many types of products, including obd connector, circular connector, agricultural connector and so on.We can meet the requirements of various customers. Feel free to learn more about connectors or buy our connectors,looking forward to your message.
Read more about the connectors(Sensor and connector fusion).

评论

发表评论

此博客中的热门博文

What is the Difference Between J1939 Connector Type 1 and 2?

-
图片
  SAE J1939 (hereinafter referred to as J1939) is the recommended standard of the American Society of Automotive Engineers (SAE). It is controlled and communicated by the "Truck and Bus Electrical & Electronics Committee" (Track & Bus Electrical & Electronics Committee). Developed and written by the Track & Bus Control and Communications Network Subcommittee. J1939 has become a recognized industry standard and choice for commercial vehicle diagnostics and data communication heavy, off-highway, truck, bus, ship propulsion, power generation, industrial pumping, construction, and material handling machinery. J1939 is a high-level protocol network (CAN) based on Controller Area. It is widely used by the diesel engine industry to provide diagnostic data such as vehicle engine speed, temperature, oil temperature, exhaust emissions, and other customizable options. J1939 connectors are divided into black and green rubber cores, but do you know the difference between t...
阅读全文

Benefits of overmolded connectors and wiring harnesses?

-
图片
What is overmolding? In short, overmolding is an injection molding process in which two or more materials are used to combine a harness wire and a connector to form a single part, and the cable assembly is placed in a mold. In this process, the first material substrate will be covered by other materials. The overmolding process requires the use of insert molding (single injection) or multiple injection molding techniques to cover rigid plastic parts with TPU layers or other overmolding materials. So what are the benefits of the connector and harness overmolding process? Benefits of overmolding connectors and harnesses: 1. Increase the flexibility of the cable harness exit so that most of the movement between the cable harness and the connector occurs at the cable harness exit. 2. Provide abrasion resistance, impact resistance or impact resistance. 3. Fix the cable assembly by sealing the assembly in plastic. 4. Provide 360 degree strain relief and increase tension. 5. Cr...
阅读全文

​Cars are equipped with diagnostics tool or obd-ii ports

-
图片
Modern cars have the capacity of a few computers, are tooled with software that contains millions of lines of programming code and produce gigabytes of data, but they are still different from connected cars. ​ A smart vehicle is able to optimize its performance to reduce fuel consumption, show the best path to follow taking into account current traffic and weather conditions, detect errors in the engine and collect information data to negotiate lower insurance rates. Most cars and light trucks are equipped with on-board diagnostics or an OBD II port that provides access to data from the engine control unit (ECU). To get the information you need to plug in an external device. The OBD-II specifications provide a standardized hardware interface - a female 16-pin (2x8) J1962 connector, so a single external device can be used for most car models. It also should have an Internet connection to transfer the collected data. OBD-II connects to the Internet, and generally needs to use th...
阅读全文