Connector new product development process

-
In the process of new product development, risk control needs to be considered in advance. There are four basic approaches to risk control: risk avoidance, loss control, risk transfer, and risk retention.
Connector new product development process
Risk avoidance is the intentional abandonment of risky behaviors by investment entities to completely avoid specific loss risks. Simply risk aversion is the most negative way to deal with risk, because investors often give up potential target returns at the same time they give up risky behavior. Therefore, this method is generally used only in the following situations: 1. The investment subject is extremely averse to risk. 2. There are other solutions that can achieve the same goal, and the risk is lower. 3. Investment entities are unable to eliminate or transfer risks. 4. The investment entity is unable to bear the risk, or the risk cannot be adequately compensated.
Loss control is not abandoning risk, but making plans and taking measures to reduce the possibility of loss or to reduce actual losses. The control stage includes three stages before, during and after. The purpose of ex-ante control is mainly to reduce the probability of loss, and ex-post and ex-post control is to reduce the actual loss.
Risk transfer refers to the act of transferring risk to others through contracts. Risk transfer can sometimes reduce the degree of risk of economic entities. The main forms of risk transfer are contracts and insurance.
Risk retention is risk taking. In other words, if a loss occurs, the economic entity will pay with any funds available at the time. Risk retention is divided into unplanned retention and planned self-insurance.

Yeahui is a connector supplier with 11 years of experience in developing high quality connectors and wiring harnesses. wo have many types of products, including obd connector, circular connector, agricultural connector and so on.We can meet the requirements of various customers. Feel free to learn more about connectors or buy our connectors,looking forward to your message.
Read more about the connectors(The pain point of warehouse management).

评论

发表评论

此博客中的热门博文

What is the Difference Between J1939 Connector Type 1 and 2?

-
图片
  SAE J1939 (hereinafter referred to as J1939) is the recommended standard of the American Society of Automotive Engineers (SAE). It is controlled and communicated by the "Truck and Bus Electrical & Electronics Committee" (Track & Bus Electrical & Electronics Committee). Developed and written by the Track & Bus Control and Communications Network Subcommittee. J1939 has become a recognized industry standard and choice for commercial vehicle diagnostics and data communication heavy, off-highway, truck, bus, ship propulsion, power generation, industrial pumping, construction, and material handling machinery. J1939 is a high-level protocol network (CAN) based on Controller Area. It is widely used by the diesel engine industry to provide diagnostic data such as vehicle engine speed, temperature, oil temperature, exhaust emissions, and other customizable options. J1939 connectors are divided into black and green rubber cores, but do you know the difference between t...
阅读全文

Benefits of overmolded connectors and wiring harnesses?

-
图片
What is overmolding? In short, overmolding is an injection molding process in which two or more materials are used to combine a harness wire and a connector to form a single part, and the cable assembly is placed in a mold. In this process, the first material substrate will be covered by other materials. The overmolding process requires the use of insert molding (single injection) or multiple injection molding techniques to cover rigid plastic parts with TPU layers or other overmolding materials. So what are the benefits of the connector and harness overmolding process? Benefits of overmolding connectors and harnesses: 1. Increase the flexibility of the cable harness exit so that most of the movement between the cable harness and the connector occurs at the cable harness exit. 2. Provide abrasion resistance, impact resistance or impact resistance. 3. Fix the cable assembly by sealing the assembly in plastic. 4. Provide 360 degree strain relief and increase tension. 5. Cr...
阅读全文

​Cars are equipped with diagnostics tool or obd-ii ports

-
图片
Modern cars have the capacity of a few computers, are tooled with software that contains millions of lines of programming code and produce gigabytes of data, but they are still different from connected cars. ​ A smart vehicle is able to optimize its performance to reduce fuel consumption, show the best path to follow taking into account current traffic and weather conditions, detect errors in the engine and collect information data to negotiate lower insurance rates. Most cars and light trucks are equipped with on-board diagnostics or an OBD II port that provides access to data from the engine control unit (ECU). To get the information you need to plug in an external device. The OBD-II specifications provide a standardized hardware interface - a female 16-pin (2x8) J1962 connector, so a single external device can be used for most car models. It also should have an Internet connection to transfer the collected data. OBD-II connects to the Internet, and generally needs to use th...
阅读全文