The reason why the connector terminals need electroplating

-
The reason why the connector terminals need electroplating


The connector terminals are part of the important components of the connector. The primary function is to contact the device to create a conductor that conducts conductive information. The plating process of the connector terminals is very important, and the terminals of each connector product often need to electroplated. The following is the reason why the connector terminals need electroplating.


If the connector terminals are not subjected to an electroplating process, the signal and conductivity of the product may cause instability.
The good connector terminals are subjected to electroplating because the terminals are better plated to improve electrical conductivity and thermal performance, as well as oxidation and corrosion resistance.
The electroplating process of the connector terminals can increase the service life of the product.
Yahui Electronics Co., Ltd. specializes in producing all kinds of connectors. Through 11 years of development, our customers are all over the world. The result of such a result is that we have strong suppliers and our professional technical team. Our main business is custom connectors and extension cables such as obd connector, circular connectors, obd extension cables and more. If you are interested in our products, please contact us.

评论

发表评论

此博客中的热门博文

What is the Difference Between J1939 Connector Type 1 and 2?

-
图片
  SAE J1939 (hereinafter referred to as J1939) is the recommended standard of the American Society of Automotive Engineers (SAE). It is controlled and communicated by the "Truck and Bus Electrical & Electronics Committee" (Track & Bus Electrical & Electronics Committee). Developed and written by the Track & Bus Control and Communications Network Subcommittee. J1939 has become a recognized industry standard and choice for commercial vehicle diagnostics and data communication heavy, off-highway, truck, bus, ship propulsion, power generation, industrial pumping, construction, and material handling machinery. J1939 is a high-level protocol network (CAN) based on Controller Area. It is widely used by the diesel engine industry to provide diagnostic data such as vehicle engine speed, temperature, oil temperature, exhaust emissions, and other customizable options. J1939 connectors are divided into black and green rubber cores, but do you know the difference between t
阅读全文

Benefits of overmolded connectors and wiring harnesses?

-
图片
What is overmolding? In short, overmolding is an injection molding process in which two or more materials are used to combine a harness wire and a connector to form a single part, and the cable assembly is placed in a mold. In this process, the first material substrate will be covered by other materials. The overmolding process requires the use of insert molding (single injection) or multiple injection molding techniques to cover rigid plastic parts with TPU layers or other overmolding materials. So what are the benefits of the connector and harness overmolding process? Benefits of overmolding connectors and harnesses: 1. Increase the flexibility of the cable harness exit so that most of the movement between the cable harness and the connector occurs at the cable harness exit. 2. Provide abrasion resistance, impact resistance or impact resistance. 3. Fix the cable assembly by sealing the assembly in plastic. 4. Provide 360 degree strain relief and increase tension. 5. Cr
阅读全文

​Two performances that the connector's needs

-
图片
When selecting a connector, first look at the mechanical properties, when the two connection points are to be connected by a connector, it is considered whether the insertion force and the extraction force of the connector are in compliance with the product standard. There is also a need to pay attention to its environmental performance, which can be selected according to the working environment of the mechanical equipment using the connector. The connector used in mechanical equipment must be subjected to a working temperature range that is greater than the operating temperature range of the mechanical equipment，whice must be able to work under the maximum humidity of the mechanical equipment, and also have the ability to resist impact, push and vibration. ​ A good connector must work properly at its standard high and low temperatures, and its parts must not be damaged by high or low temperatures. It is well known that humidity affects the insulation performance of the connector.
阅读全文