Cable connectors require good sealing ability

-
Cable connectors require good sealing ability.In the harsh environment, the weakest problems in electronic systems are often exposed. From pocket-type consumer devices to complex military equipment, various devices may be exposed to moisture. At this time, the cable connector needs to be well sealed. In order to solve some environmental challenges, some industry standards to be observed are also worthy to attention.
​cable connectors require good sealing ability
Electronic systems and devices exist in all aspects of our lives, whether at home or at work, they operate reliably under a variety of conditions, depending on their intended purpose. For example, the typical operating environment for consumer electronics is much smaller than the operating environment encountered in military or industrial environments. Therefore, not all types of equipment need to meet strict standards, but understanding these standards and their requirements for designing applications for various applications is critical.
The reliability of cable connectors is critical, especially in the case of prolonged use, which can cause problems. This single point of failure is unacceptable under extreme conditions often occurs at military operations. For example, consider the requirement imposed on a diving equipment that must operate reliably at a depth of 20 meters, at which the ambient pressure is three times the atmospheric pressure at sea level. This means that the seal of the diving equipment must be designed to withstand greater pressure than the land-based system for a long time.
Immersing cable connectors in water is one of the many challenges facing product developers. Other environmental challenges include exposure to dirt and dust, high humidity, extreme temperatures, corrosive gases, corrosive liquids, shock and vibration. Electrical breakdown, electromagnetic interference and RF emissions.
When selecting electronic components for harsh environments, it is important to consider accessories that may leak. The cable connector is one of the accessories that is easy to leak.

Yahui Electronics Co., Ltd. is a factory that manufactures cable connectors.And all of our obd connectors and cables have been exported to Europe, America, Brazil, South Africa, Iran and many other countries and regions.
Read more adble the cable connectors(High-voltage connectors for new energy vehicles).

评论

发表评论

此博客中的热门博文

What is the Difference Between J1939 Connector Type 1 and 2?

-
图片
  SAE J1939 (hereinafter referred to as J1939) is the recommended standard of the American Society of Automotive Engineers (SAE). It is controlled and communicated by the "Truck and Bus Electrical & Electronics Committee" (Track & Bus Electrical & Electronics Committee). Developed and written by the Track & Bus Control and Communications Network Subcommittee. J1939 has become a recognized industry standard and choice for commercial vehicle diagnostics and data communication heavy, off-highway, truck, bus, ship propulsion, power generation, industrial pumping, construction, and material handling machinery. J1939 is a high-level protocol network (CAN) based on Controller Area. It is widely used by the diesel engine industry to provide diagnostic data such as vehicle engine speed, temperature, oil temperature, exhaust emissions, and other customizable options. J1939 connectors are divided into black and green rubber cores, but do you know the difference between t...
阅读全文

Benefits of overmolded connectors and wiring harnesses?

-
图片
What is overmolding? In short, overmolding is an injection molding process in which two or more materials are used to combine a harness wire and a connector to form a single part, and the cable assembly is placed in a mold. In this process, the first material substrate will be covered by other materials. The overmolding process requires the use of insert molding (single injection) or multiple injection molding techniques to cover rigid plastic parts with TPU layers or other overmolding materials. So what are the benefits of the connector and harness overmolding process? Benefits of overmolding connectors and harnesses: 1. Increase the flexibility of the cable harness exit so that most of the movement between the cable harness and the connector occurs at the cable harness exit. 2. Provide abrasion resistance, impact resistance or impact resistance. 3. Fix the cable assembly by sealing the assembly in plastic. 4. Provide 360 degree strain relief and increase tension. 5. Cr...
阅读全文

​Cars are equipped with diagnostics tool or obd-ii ports

-
图片
Modern cars have the capacity of a few computers, are tooled with software that contains millions of lines of programming code and produce gigabytes of data, but they are still different from connected cars. ​ A smart vehicle is able to optimize its performance to reduce fuel consumption, show the best path to follow taking into account current traffic and weather conditions, detect errors in the engine and collect information data to negotiate lower insurance rates. Most cars and light trucks are equipped with on-board diagnostics or an OBD II port that provides access to data from the engine control unit (ECU). To get the information you need to plug in an external device. The OBD-II specifications provide a standardized hardware interface - a female 16-pin (2x8) J1962 connector, so a single external device can be used for most car models. It also should have an Internet connection to transfer the collected data. OBD-II connects to the Internet, and generally needs to use th...
阅读全文